Windows
Collection

The air ventilator is automatically controlled by the pressure difference, with the possibility of closing for minimal air flow

Air flow at 10 Pa: 6–24 m³/ h

The diffuser is controlled by the differential pressure and is distinguished by its narrow design

Air flow at 10 Pa: 15 m³/h

Aluminum diffuser with a flat design

Suitable for mounting above or below a glazing unit with a width of 24, 28, 29, 33 or 34 mm

A rebate vent, which is placed in the inner part of the frame, makes it almost invisible when the window is closed

This allows air to circulate at the point of installation

To be mounted on the glass or in an independent window field between the crossbars

Air damper with the degree of opening regulated by means of manual levers

To be mounted on the glass or in an independent window field between the crossbars with an adaptive profile

Air damper with opening adjustable by means of manual levers

To be mounted on the glass or in an independent window field between the crossbars

Air damper with the degree of opening regulated by means of manual levers

An aluminum pressure diffuser adapted for installation over a glazing unit with a thickness of 23, 24, 25, 26, 35, 36, 37, 38, 39, 40, 41 i 42 mm

It can be closed using an additional lever

Aluminium pressure-controlled vent

I-flux technology

Self-regulating trickle ventilator, where the airflow depends on the relative humidity within the room.

It allows for manual locking of the ventilator in the maximum or minimum airflow position.

Self-regulating ventilator operating by means of the pressure difference between the interior and exterior of the room.

Airflow at 10 Pa: 7–29 m³/h.

Self-regulating pressure-controlled rebate trickle vent (PVC)

Installation requires milling the sash rebate and removing a section of the frame gasket